Top Maintenance Kits for your JLG 400SC and 460SJC Boom Lift: Part 9 of 10
|
|
Tiempo de lectura 3 min
en pedidos $1500+
|
|
Tiempo de lectura 3 min
(Part 1) SN 0300000100 to 0300095999
(Part 2) SN 0300096000 to 0300203770
(Part 3) SN 0300203771 to 0300272360 excluding 0300272174 thru 0300272184
SN 1300000100 to 1300007393
SN E300000100 to E300007988 excluding E300007847
(Part 4) PVC 2001
PVC 2007
(Part 5) PVC 2101
(Part 6) PVC 2107
(Part 7) PVC 2201
(Part 8) PVC 2207
(Part 9) PVC 2301
(Part 10) PVC 2307
If you're reading this, that means you have in your possession a JLG 400SC or 460SJC boom lift. This is the most comprehensive online guide for the kits that you will need throughout the machine's life. Here is our list of the most common kits that you will need for the maintenance of your JLG lift with a serial number PVC 2301.
The light panel installation part number that is found in your parts manual is an installation item. If you have any other questions, give us a call or an email!
Below is the turntable bearing kits for the 400SC and 460SJC. Contact us to find out more.
The installation kit (part 1001165538 power track installation) is sold on the component level. The power track below is the correct track. The Repair Section (without clamp) - 10 links and the mounting feet are also below if you are looking for specifics from the track.
The following 8 parts make up the SC Swivel Hose Kit for the 400SC. The hydraulic diagrams on the 400SC and 460SJC contain a bunch of hose kits with a part number for the kit. You cannot purchase any of these as an actual kit, but we can find all of the parts you need and essentially build the kit for you.
All of the decal kits for the 400SC and 460SJC for the PVC 2301 manual are sold individually, like decal installation (turntable) 1001239561. Click the link at the top to go to the manual to find the specific decals that you need, or just give us a call!
The right filter kit for your JLG boom lift depends on the manufacturer of the machine's engine.
The right filter kit for your JLG boom lift depends on the manufacturer of the machine's engine.
The right filter kit for your JLG boom lift depends on the manufacturer of the machine's engine.
Last but not least, we have a list of undercarriage assemblies for the 400S and 460SJ boomlift.
The undercarraige assembly (part number 1001236609) for the 400SC and 460SJC is sold at the component level. The rubber track assembly that is part of that installation item is shown below.
The undercarraige assembly (part number 1001244414) for the 400SC and 460SJC is sold at the component level. The rubber track assembly that is part of that installation item is shown below.
There you have, folks. Now that you have a complete view of your machine's maintenance kits and tires, hopefully you can use this information to increase your success with preventative maintenance. Check out the blog post below on the recommended service tools for your 400SC or 460SJC boom lift, straight from the manual!